Cleaning Company Speaks on Preventing Mold Infestation for Safety of All

LOS ANGELES, CA: Building Cleaning Services, ( a Los Angeles mold removal and building cleaning company, works with business owners to make offices free of the negative effects of mold infestation. In addition to cleaning mold, preventing it in the first place is an important step to maintaining a safe and healthy workplace. Building Cleaning Services has over a decade of experience handling Los Angeles mold infestations in businesses.

According to the Occupational Safety & Health Administration (OSHA) there are ways to prevent the growth of mold indoors. From a guide published on the administration’s website: “Moisture control is the key to mold control. When water leaks or spills occur indoors – act promptly. Any initial water infiltration should be stopped and cleaned promptly. A prompt response (within 24-48 hours) and thorough clean- up, drying, and/or removal of water-damaged materials will prevent or limit mold growth. Mold prevention tips include:

Repairing plumbing leaks and leaks in the building structure as soon as possible.

Looking for condensation and wet spots. Fix source(s) of moisture incursion problem(s) as soon as possible.

Preventing moisture from condensing by increasing surface temperature or reducing the moisture level in the air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in the air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).

  1. Keeping HVAC drip pans clean, flowing properly, and unobstructed.
  2. Performing regularly scheduled building/ HVAC inspections and maintenance, including filter changes.
  3. Maintaining indoor relative humidity below 70% (25 – 60%, if possible).
  4. Venting moisture-generating appliances, such as dryers, to the outside where possible.
  5. Venting kitchens (cooking areas) and bathrooms according to local code requirements.
  6. Cleaning and drying wet or damp spots as soon as possible, but no more than 48 hours after discovery.
  7. Providing adequate drainage around buildings and sloping the ground away from building foundations. Follow all local building codes.
  8. Pinpointing areas where leaks have occurred, identifying the causes, and taking preventive action to ensure that they do not reoccur.

The full text of their guide can be seen here:

Building Cleaning Services is certified by the Institute of Inspection Cleaning and Restoration Environmental Testing & Technology, Inc. to perform mold infestation removal. If mold has gone beyond the point of prevention and is a definite problem in an office, steps must be taken at once to handle the mold problem. It is crucial that a business owner call a qualified mold remediation company to inspect the area at once.

Building Cleaning Services has had much success as a Los Angeles mold remediation company. One of their customers stated: “We use Building Cleaning Services at the company where I work (and have been for the last few years). They are consistently great and professional. Alan still calls us regularly to make sure we are happy with the services. If there is ever anything that is an issue or needs special attention, they are accessible and make sure everything is taken care of. They come on a weekly basis to clean several offices, studios and a couple bathrooms and everything is always clean. Their prices are reasonable and we have never had a problem.”

Building Cleaning Services’ other reviews on Yelp can be seen at

BCS provides water damage handling and mold removal services for the Greater Los Angeles area, and other areas of Southern California. Established in 1997, they have over a decade of experience as a company with fast service, high professionalism and work ethic. BCS is certified by the Institute of Inspection and Cleaning and Restoration and Environmental Testing & Technology. To learn more, visit, or call 818-953-7100 or e-mail